CNCSimulator Pro

user guide
×
Menu
Index

6.1.2. G75 Grooving cycle

This cycle cuts internal or external grooves. The cycle is programmed using a two- block format.
 
 
The parameter for the first block is:
 
R: Retract amount. The distance to retract for each peck.
 
The parameters for the second block are:
 
X: End position for the groove in the X axis.
 
Z: End position in the Z axis.
 
P: Peck depth for each cut in the X axis (thousands).
 
Q: Stepping in the Z axis (thousands).